If the volume shown on your PerfectDraft Pro machine does not seem correct, there are a few simple checks that usually resolve it.
- Pour a beer
- When a new keg is installed, the volume may not update immediately.
- Pouring your first beer often activates the calculation. Make sure you pull the tap handle fully down in one smooth motion.
- Check the keg connection
Make sure the keg and tap unit are securely fitted.
- A loose connection can affect pressure and volume readings.
- Clean the machine
- Build-up or residue can sometimes interfere with performance. Clean the tap unit and visible components according to the user manual.
- Reset the machine
- Unplug the machine, wait a few minutes, then plug it back in. This can reset the display.
Please note:
- Keg volume on PerfectDraft Pro is calculated based on dispense pressure.
- There is an approximate ±300 ml margin of error.
- The volume is not calculated immediately when a keg is inserted, but after the first pressurisation attempt (usually after the first pour)