The E1 code means there is a serious air leak and the pump is running for too long. This is most often caused by a loose keg connection or an issue with the keg itself.
To resolve this, try the following steps:
- Open the door, leave it open for about a minute, then close it again to reset the machine.
- Remove the keg from the tap unit, rinse the seals on the tap, then reconnect the keg. You should hear two clicks when it’s properly connected.
- Check the seals on the top of the keg and the bottom of the tap unit to make sure they are clean and undamaged.
- If possible, try a different keg. If the error disappears, the issue is likely with the original keg.
If the error code remains after trying these steps, please contact our customer service team and we’ll be happy to help.