The E0 code means the machine cannot generate pressure because no keg is being detected. This is usually caused by a loose keg connection or an issue with the keg itself.
To resolve this, try the following steps:
- Open the door, leave it open for about a minute, then close it again to reset the machine.
- Remove the keg from the tap unit, rinse the seals on the tap, then reconnect the keg. You should hear two clicks when it’s properly fitted.
- If you’ve reinserted a nearly empty keg that was stored in the fridge, it may have lost pressure. Try opening and closing the door a few times to help re-pressurise it.
- If possible, try a different keg. If the error disappears, the issue is likely with the original keg.
If the error code remains after trying these steps, please contact our Customer Service team.